Autorich Machinery & Automation

The Nx2000 series adds a new dimension to L&T Electrical & Automation E&A's AC drive solutions. Built to E&A's stringent quality standards, the Nx2000 Series AC drive is tested and certified to meet global benchmarks, thus giving you the assurance of total reliability. 

Compact, lightweight, easy to install, operate and service - the Nx2000 Series is perfectly suited for conveyors, pumps, fans and textile machinery. It handles load up to 11 kW, and is engineered to keep your machine operating at optimum efficiency, even in the hot, humid and dusty conditions that characterise India's industrial environment.

Submersible pump AC Drive. works from 180v to 500v.
Features: 1) Input: 2 & 3 ph
2) output: 3ph
3) Ever lowest and highest voltage range.
4) One year warranty.
5) with auto start up.
6) online programming support
7) installation support on additional cost
8) Available for all motor ranges.
Product introduction: L&T SX2000 series is a universal frequency converter, which can be widely used in various types of induction motor speed control. vector control algorithm with high performance and high precision motor drive control to improve its quality reliability and environment adaptability at the same time, strengthen easy operation for user. It achieves function optimization, more flexible application, and more stable performance.
Main features:
(1) Double specifications of the design: heavy load model (150% load 1 minute) and light load patterns (120% load 1 minute) dual specifications;
(2) The use of fourth generation IGBT module combined with the characteristics of 175 ??? maximum junction temperature, which adopts innovative PWM modulation method to further reduce the switching loss and makes the inverter run up to50 ??? ambient temperature without de-rating;
(3) Advanced independent air duct design prevents pollutants from entering the electronic system area and efficiently improve protection effect to adapt to all kinds of complicated and worse site condition such as GRANITE application's; meanwhile; independent air duct could effectively solve the heat dissipation problem of control cabinet;
(4) Compact size and support parallel installation to save installation space;
(5) Adopt advanced flux estimation technology, and speed estimation technology and so on to realize high-performance sensor less speed vector control so as to unleash motor's best performance;
(6) Parameter auto tuning function: static parameter auto tuning function, output cable short circuit deduction. Motor impedance checking etc;
(7) Built-in Modbus communication protocol to make automatic system integration convenient; Excelent inbuilt PID for maximum water yield solar pump, constant pressure, torque based application etc and efficient inbuilt PLC with time cycle and direction.
(8) Its wide voltage range design ensures QJ2000 frequency inverter's excellent adaptability to grid fluctuation;
(9) Thicken three-anti paint (anti-humidity, anti-dust, anti-fungal) protection to enforce its reliability in the worse working environment;
(10) Available upto 500kw on 200/400v ranges.
(11) Best drive for solar applications and leading drive in single, two phase to three phase conversion applications.
(12) One year flexible warranty.

An L&T VFD (Variable Frequency Drive) is an electrical device used to control the speed and torque of an AC motor by adjusting the motor's input frequency and voltage. It is designed for energy efficiency and precision in industrial automation, HVAC systems, pumps, and conveyors. The VFD enhances motor performance, reduces energy consumption, and allows for smooth acceleration and deceleration, prolonging motor life.

Key Features:

1. Energy Savings
2. Precise Motor Control
3. Built-in Protections
4. User-Friendly Interface

Applications: Manufacturing, HVAC, water treatment, and more.

Compact, lightweight, easy to install, operate and service the CX2000 Series AC Drives is perfectly suited for conveyors, pumps, fans and textile machinery. It handles loads up to 11 kW, and is engineered to keep your machine operating at optimum efficiency, even in the hot, humid and dusty conditions that characterise India's industrial environment.

Range:

• Single Phase 230V - 0.1 to 2.2kW
• Three Phase 230V - 0.2 to 11kW
• Three Phase 415V - 0.75 to 11kW

Enclosures: IP20

Features:

• V/F Control, Sensor less Vector Control, Slip Compensation
• Starting Torque 150% at 3 Hz
• Built-in Potentiometer
• Conformal Coated PCB
• Built-in RS485 Modbus
• RPM Display
• Draw Mode
• Brake Control
• Auto Tuning
• Built-in PID
• 2nd Motor Operation
• Built-in Safety circuit
• Built-in Braking Chopper up to 11kW

Dual rating operation:

• Designed to be used for heavy and normal duty applications.

Overload capacity:

• Heavy duty operation: 150% of rated current for 60 sec
• Normal duty operation: 110% of rated current for 60 sec

Built-in Potentiometer:

• Possible to add reference from keypad and external signal
• Provides external potentiometer for easier frequency control

Built-in PID:

• Cx2000 has built-in PID which saves use of external PID

2nd Motor Operation:

• Single AC Drive can maintain 2 motor parameters connected to 2 different loads with different Accel / Deccl parameter setting
• For isolated operation of motors one VFD can be used in place of 2

We are providing L T Vfd to our customers providing  best quality to our customers at reasonable rates.

The Nx2000+ is the solution for general purpose applications because of its high performance sensorless operation, premium quality and high reliability.

The Nx2000+ has an advanced sensorless vector mode along with a highly adaptable V/F mode making it one of the most versatile drives in the market.

The Nx2000+ is the solution for general purpose applications because of its high performance sensorless operation, premium quality and high reliability.

The Nx2000+ has an advanced sensorless vector mode along with a highly adaptable V/F mode making it one of the most versatile drives in the market.